Motorcycle news, Motorcycle reviews from Malaysia, Asia and the world

Govt Allows Computerised Highway Code Test at Driving Institutes

Do you remember when you sat for the Computerized Highway Code test (KPP01) otherwise known as ujian undang-undang before moving on to the practical test for your driver’s license?

Depending to the driving institute we chose, we have to go to another driving institute or computerized test center to sit for the Highway Code test. But this difficulty can be avoided or reduced soon. The government has announced that they allow driving institutes to operate computerised test centers at their respective premises starting this April.

The Minister of Transport, Anthony Loke said, this will enable candidates to take the KPP test and the circuit test at the same place thus making it easier for them and reducing the waiting time.

“However, the driving institute that intends to open the test center is required to offer eTesting for circuit testing. Approved driving institutes will be required to also provide an eTesting system within one year,” he said.

This is possible as the data and questions are centralized and under the full control of the Road Transport Department (JPJ), allowing for computerized tests to be conducted at the driving institutes’ premises.

“This ia an initiative by the ministry and JPJ to simplify the requirements of owning a Malaysian Driving License and further support digitalisation of services,” he said.

Loke also said the maximum price for the KPP test is set at RM17 for motorcycles and RM27 for other vehicles.

Prototype Husqvarna Svartpilen 801 Breaks Cover

Remember we posted earlier about the Husqvarna Vitpilen 901? It turns out that we were off the mark as the prototype Husqvarna Svartpilen 801 was revealed, instead.

Previously, there was a previous teaser video which prompted the 5th March “full edit” video. It showed a bike being taken through its paces on a frozen surface, complete with spiked tyres. Still, it confirmed the arrival of a bigger Svartpilen/Vitpilen.

Husqvarna Vitpilen 901 is (Finally) Coming?

The new video called “A tale of dirt and ice” shows the prototype Svartpilen 801 in its entirety on a frozen lake and flattrack oval.

Husqvarna says the bike will weigh some 181kg, although it was not revealed if this is the dry or kerb weight. The engine, which is the LC8c shared with 790 Duke, produces 103.6 hp. That is actually slightly more than the 790 Duke’s 103.3 hp.

Husky is now owned by the Pierer Mobility Group, who in turn owns KTM, among other brands. Thus, it is safe to assume that this coming bike shares the same underpinnings with the 790 KTM, as with other models in the Husqvarna lineup. Examples are the Svartpilen 401 and Vitpilen 401.

As such, the twin-cylinder LC8c engine will be attached to a steel frame. The same type of swingarm also appears in the video. The main difference here is the subframe, most likely to facilitate flattrack riding in the video. And of course, the WP Apex forks since WP Suspension also belongs to Pierer Mobility.

On the electronics front, the bike may well include Supermoto ABS mode which allows the rider to slide the rear wheel. The rider in the video can be seen performing such stunt. We can look forward to a TFT screen with multimedia connectivity, traction control, quickshifter, and so on as with the 790 Duke.

Husqvarna says, “The all-new middleweight model has been engineered to deliver a powerful combination of performance, agility and contemporary style to take riding to even greater heights.

“The versatility of the Svartpilen 801 is enhanced further by state-of-the-art electronic rider aids, including Easy Shift [an up/down quickshifter] for seamless gear changes, as standard.”

So what is next? The full world reveal will be on 19th March 2024 so stay tuned! And of course, a Vitpilen 801 will surely follow in the near future.

What are the Standards for Brake Pads?

Needless to say, brake pads are part of what makes the brake system as a whole operate, and it is true for regardless if it is a hydraulic or drum system. No brake pad, no brakes! So, what are the standards for brake pads?

So, what is/are the standards?

Firstly, we must always start by determining the need for standards.

Standards call for repeatable testing methods that usually resonate with advancements. Standards also ensure that any tested and approved product meets a certain set of requirements – usually for safety benefits to consumers. On the other hand, manufacturers could do anything as the please to the detriment of consumers. The best example is the motorcycle helmet.

So, for brake pads, especially imported ones, are tested and approved through:

ECE R90

“ECE” stands for Economic Commission of Europe. Also sometimes marked as “CE” for Conformité Européenne.
“R” stands for Regulation.
“90” is the number of the standard. (Remember that motorcycle helmet falls under R22?)

Virtually any product sold in the European Union countries must be test and certified to their respective standards.

How about Malaysia?

Malaysia has her own standards for brake pads, namely:

MS1164:2015

“MS” stands for Malaysian Standards.
“1164” is the standard’s number.
“2015” is the year of the revision.

And which standard should I go by?

The MS1164:2015 came into effect as of 1st November 2015 and brake pads made in Malaysia must have these letters printed on the pads’ backing plate.

Imported pads should have the ECE R90 standard printed on them. But the importer or producer may also seek the approval of the MS1164:2015 standard.

Best to go for brake pads that are certified to ECE R90 or MS1164:2015 or both. DO NOT compromise on brake pads or any brake component, for that matter, because they involve yours and your loved ones’ safety.

We shall touch more on the tests involved in the near future.

Government Urged to Abolish Gombak and Karak Toll Plazas

Datuk Seri Tuan Ibrahim Tuan Man (PN-Kubang Kerian) urged the government to abolish the Gombak and Karak tolls to reduce traffic congestion on the highway.

According to him, users need to stop at four toll plazas to use the East Coast Highway (LPT).

“For example, on the east coast highway, we have four tolls where users have to stop. The Gombak Toll, the Bentong Toll, the Karak Toll and the exit. As for easing the burden on users, the government should use two methods. Only when entering and exiting.

“(As such) two tolls need to be abolished. The Gombak toll and the Karak toll do not need to be held because they cause slow traffic and congestion,” he said during the royal decree debate session.

Commenting further, Tuan Ibrahim who is also the Leader of the Pahang State Opposition and Deputy President of PAS claimed that highway congestion is now one of the failures of the ministry and operators.

“I see this as a failure on the part of the ministry and the operators who operate the highway. Highway congestion is extreme and occurs throughout the country, especially in toll plaza areas,” he said.

In the meantime, he also urged the government to ensure that there is no road repair or patching work during peak hours.

“Yesterday I came back from Kota Bharu. Concession workers are repairing the highway over the bridge in the highway area in Kemaman. There are many cars during peak hours and yet they chose to repair the patch on the bridge. This should not happen and we ask the government to make sure there is no road repairs at peak user times which cause extreme congestion,” he said.

Brembo Opens a Factory in Thailand

Brembo opens a factory in Thailand. The preeminent Italian braking provider is the latest in the host of automotive brands to set up their production facilities in the kingdom.

Brembo’s investment is said to be worth €40 million (RM 205,148,217.88) with the aim of supplying to the Southeast Asian market. As with other manufacturers, the facility is sited in Rayong, just east of Pattaya. It will focus on braking systems for manufacturers in Thailand. They will employ approximately 150 people with operations expected to being in the first quarter of 2025.

The move is seen as a wise one, given the hotbed of motorcycle usage in the region, consisting of motorcycle-centric countries such as Thailand, Vietnam, Cambodia, Indonesia, Philippines, and Malaysia. It remains to be seen if Brembo will supply the products from this factory to the wider Asian region such as India, China and Japan.

Brembo’s products are considered the best in the industry and used almost exclusively by premium motorcycles. But Brembo’s acquisition of J. Juan and producing the ByBre brand opens up to a wider market.

As mentioned earlier, Brembo joins a long list of both manufacturers and component suppliers with facilities in Thailand. Motorcycle brands like BMW, Ducati, Kawasaki, Triumph have factories in Thailand that cater to the Asian and in some cases, the global market. On the other hand, virtually any popular car brand has production facilities in that country. The same can be said for component manufacturers such as Bridgestone and Michelin.

So, the question is: Will Brembo parts will be less expensive after 2025?

2024 Yamaha YZF-R25 Debuts with New Colour

Hong Leong Yamaha Motor Sdn. Bhd. launched the 2024 Yamaha YZF-R25 with a new color. It is a white variation called Glacier White. The blue colour variant which is ever-popular since its launch, Racing Blue, is still on sale.

Buyers can find the new color 2024 Yamaha YZF-R25 at all official Yamaha dealers from March 4, 2024. The selling price remains the same as the 2023 price of RM 22,998.00, excluding registration and insurance. As usual every purchase includes a brake disc lock worth RM100.

The R25 engine remains the same, which is a 249cc, DOHC, parallel-twin. It produces 26.4 kW (35.4 HP) at 12,000 RPM and 22.6 Nm of torque at 10,000 RPM. Anti-Lock Brake (ABS) and LED signal lights are standard.

The R25 machine is still popular and well received among local motorcycle enthusiasts, even though it has been on the market since 2015. It has gone through several updates and upgrades since then, until the version that features the ABS braking system in 2023.

The arrival of the ABS version is a good move because the 250cc segment is one most intensely contested among motorcycle manufacturers. It is filled with brands such as Honda, Kawasaki, Suzuki, CFMoto, KTM, Modenas/Bajaj, Husqvarna.

Regardless, the Yamaha YZF-R25 still gets a lot of attention until now.