Bikesrepublic

Latest News

Prime Minister of Malaysia, Datuk Seri Anwar Ibrahim, who is also known as PMX, warned that strict action including revoking their license will be taken against any party who increases the price of services or goods. The warning also includes parties entitled to diesel subsidies.

The action should be taken because the targeting of the fuel subsidy is implemented to help the needy.

“We know people think that we the Cabinet of Ministers have it easy, we have no heart, we don’t care about difficult people, raise the price… no.

“I personally held dozens of meetings so as not to burden (the people), so fishermen were excluded, so subsidies continues for fishermen, small farmers, school buses.

“School buses go up (service prices), but we warn you, you are subsidised and (yet) you hike prices, we will withdraw your license, and cancel your company,” he said.

School bus, express bus, and tourist bus services should not increase price

Meanwhile, Malaysia’s Transport Minister, Anthony Loke said the school bus fare increase should not happen since the Subsidized Diesel Control System (SKDS) 1.0 for land public transport vehicles remains at the price of RM1.88 per litre.

Loke suggested that although the Government does not control school bus fares, operators should hold discussions with the Parents and Teachers Association (PIBG), while the ministry also ready to help from various angles to ease the burden on the parties involved.

School bus and express bus users are still subsidised through the use of ‘fleet’ cards, and the price of diesel for them is RM1.88 per liter compared to RM2.15 before.

Apart from that, he also said that the government does not provide subsidies for tour bus services since it involves the private sector.

“We have to understand this… if the tour bus is for tourism (and) this is for foreign tourists, not for daily use. So we do not (give) subsidies for the tourism sector.

Tow truck operator served notice

The towing service company that announced an increase in service prices on the grounds of diesel subsidy targeting has been given notice.

Director of the Ministry of Domestic Trade and Cost of Living (KPDN) Johor, Lilis Saslinda Pornomo, said a notice was given to the company and they must respond within 7 to 14 days.

“The notice is for the company to provide feedback, especially documentation evidence and reasons for the increase in their operating costs associated with the implementation of diesel subsidy rationalisation starting last Monday.”

The 2024 Harley-Davidson Hydra Glide Revival has arrived in Malaysia.

As the name suggests, the model is an homage, in fact it celebrates, the release of the first Hydra Glide in 1949. The model was a groundbreaking model for the Motor Company, with featured telescopic hydraulically damped forks. Add on the Panhead engine and it became the shape of Harley-Davidson motorcycles that have survived to this day.

“The 2024 Hydra-Glide Revival model celebrates the 75th anniversary of the 1949 introduction of the Hydra-Glide telescopic front suspension for Harley-Davidson E and F models,” Harley-Davidson notes in its official press release. “When Hydra-Glide equipped models were introduced, the saddle of a smooth-riding Harley-Davidson FL motorcycle was an exciting way for many Americans to explore the country on the new network of interstate highways,” says Harley-Davidson.

Wearing a similar paint job from the ‘56 model including the classic “V” tank badges it is like riding through history. Another nice touch is the speedometer’s old-school aesthetic and it includes a custom insert on the bar risers, displaying the Hydra-Glide logo and each bike’s exclusive serial number (only 1,750 units will be manufactured). It also features a taller (and removable) two-tone windscreen versus the Heritage Classic, with a sleek color-matched lower piece.

The rider’s saddle is decked out with tassels, studs, fringe, and white seam piping with red contrast stitching. Hard-mounted saddlebags match the vibe with a tasseled and studded treatment. The luggage is lockable and water-resistant.

The 114ci Milwaukee-Eight V-twin (1,868cc) is fitted with a circular air cleaner just like the old days. The engine is rated at 94 hp at 4,750 rpm and 119 lb.-ft. of torque at 3,000 revs. Not enough power? Look through the Screamin’ Eagle catalogue.

The front suspension consists of a pair of 49mm telescopic fork with Showa’s dual-bending valve technology. A preload-adjustable shock is hidden under the rear fender while the laced wheels and brakes are pulled from the Heritage Classic.

The 2024 Harley-Davidson Hydra Glide Revival is priced from RM176,900. Please visit the Harley-Davidson Asia Facebook page for more details and updates.

 

Honda is set to produce only electric motorcycles and cars from 2040. In other words, no more new gasoline powered internal combustion engine (ICE) from the world’s largest motorcycle manufacturer.

This decision was highlighted in the manufacturer’s Summary of 2024 Honda Business Briefing on Direction of Electrification Initiatives and Investment Strategy.

According to the brief, “Honda has not changed its belief that EVs are the most effective solution in the area of small mobility products such as motorcycles and automobiles, and Honda’s electrification target to make EVs and FCEVs represent 100% of its global vehicle sales by 2040 remains unchanged. Honda must look ahead to the period of EV popularization and build a strong EV brand and a strong EV business foundation from a medium- to long-term perspective.”

Honda has a solution to address the issue of range, which is mentioned further into the document. These electric motorcycles will use the upcoming Honda Mobile Power Pack e: (MPP) which “Honda will introduce a micro-mobility product which will be equipped with 4 MPPs in Japan before the end of FY2026.” The company is also planning to launch two new electric motorcycles powered by 2 MPPs later this year.

As for the e-Fuels, Honda did say that they find it intriguing but that technology is not mature yet for the company to plan their future products on.

You probably are already aware that reputable motorcycle gear such as jackets, pants, gloves, race suits, helmets are CE approved. And yes, there is also a CE standard for motorcycle footwear.

As you may be aware by now, the European standards committee is very serious when it comes to safety; so much so that their standards have been adopted by the United Nations. The CE mark is not something to be taken lightly, because insurance companies certain European countries will deny claims to injured motorcyclists found not wearing CE-certified gear.

CE standard for motorcycle footwear

The current CE standard for motorcycle footwear is EN 13634:2017. This is the third and latest revision after the standard was established in 2002. The revisions concerns how the shoes and boots are tested besides other safety criteria.

  1. The label shows that this is a personal protective equipment (PPE) for motorcycling use.
  1. The CE standard for motorcycle footwear, EN 13634:20XX. The year at the end notes the year of the EN 13634 standard was revised, in this case, 2017. It DOES NOT denote the year the footwear was made.
  1. Height of the footwear. “1” is for ankle height, while “2” is for tall boots that cover the shin. Some manufacturers forgo this digit.
  1. Level of abrasion resistance. The footwear is divided into two areas: Area A includes the sole, front and back of the boot. Area B includes all other areas outside A. Three samples are cut from each area and they are held against a moving abrasive belt. Thus, the abrasion level is determined from how soon the material develops a hole.
    • Level 1 means the Area A sample lasted a minimum of 1.5 seconds while the Area B sample lasted a minimum of 5 seconds.
    • Level 2 is certified when the Area A sample lasted at least 2.5 seconds, and Area B lasted a minimum of 12 seconds before holing.
  1. Impact cut resistance – how well the footwear holds up against sharp objects. A blade is mounted to a block which is then dropped at different speeds onto the footwear’s Areas A and B.
    • For Area A, the blade is dropped at 2 m/s. The blade must not penetrate more than 25mm to earn Level 1 and Level 2 rating.
    • For Area B, the blade is dropped at 2.8 m/s. Level 1 approval is accorded if the blade does not protrude more than 25mm. Level 2 approval is given if the blade does not go through more than 15mm.
  1. Transverse rigidity – The strength for the footwear in resisting being crushed i.e. motorcycle dropping onto the wearer’s foot.
    • The widest part of the footwear is positioned between two compression plates that presses together at 30 mm/min. An apparatus records the force required to compress the sole. The machine is stopped when the plates stop compressing or the force remains constant or the sole has been crushed by 20mm. The test is repeated three times.
    • If a force less than 1kN compressed the sole to 20mm, the footwear fails the test. If the force was above 1kN to 1.4kN, the footwear is certified at Level 1 for transverse rigidity. If 1.5kN or higher was required to compress the footwear by 20mm, it gets a Level 2 pass.
Optional tests

Manufacturers may opt to submit their products for additional tests. The passed criteria will be printed on the label beneath the mandatory boxes.

  1. IPS/IPS – Impact protection for the ankle or shin. The footwear is cut open at the sole and the protector is subjected to a force of 10 joules. The protector must not transmit more than 5kN through it. Should the ankle protector pass, IP will be printed on the label. If the shin protector passes, IPS will be indicated.
  1. WR – Water resistance. There are two ways of testing for this. The first is a person donning the footwear and walking a total of 1km in shallow water. Another method is by fixing the footwear to a machine with toes and replicating 4,600 steps while submerged in water. The area of dampness inside the footwear must not exceed 3cm2.
  1. FO – Fuel and oil resistance on the sole. The sample footwear is first weighed before being soaked in fuel for 22 hours. It is then removed and weighed again. The new weight should not increase more than 12%.
  1. SRA/SRB/SRC – Sole’s slip resistance. The tests are carried out with a mechanical heel placed at a 7-degree angle. If the footwear’s label shows “SRA,” it passed on a ceramic tile surface covered with diluted soap. “SRB” means steel floor treated with glycerol. “SRC” means the footwear passed both the SRA and SRB tests.
  1. Breathability of upper parts – If the footwear’s label has a “B” on it, it has passed the test for moisture vapour escape.
  1. WAD – Water absorption/desorption of inner. The footwear is tested to see how much water gets soaked into the inner and how much of that is released.
In closing

Do consider wearing CE tested footwear when you ride because they were exhaustively tested before being approved for sale.

Granted, there are also motorcycle footwear in the market without without CE approval but there is no telling how well they will protect your leg and feet in any accident.

And no, your Nike Air Jordan is not CE certified for motorcycle riding.

The automotive world was recently shaken by a scandal among Japanese manufacturers which involved them falsifying test data. Among those caught in the mix was Yamaha, the only Japanese motorcycle manufacturer found to have done so.

Investigators found that Yamaha had falsified the sound emission test data for three models namely the YZF-R1, YZF-R3, and TMAX. The company has since halted the shipment of all models.

We reached out to the official Yamaha distributor in Malaysia, Hong Leong Yamaha Motor for clarification and was told that the issue only involved motorcycles for the Japanese market, hence local models are not affected.

Afterwards, the Yamaha Motor Company issued an official statement confirming that the issue does indeed involve Japanese-only models. Below the official statement, translated from Japanese.

“The issue recently announced in Japan does not affect overseas production units, Japanese domestic distribution only. The safety of the product has been confirmed, and (Yamaha Motor Corporation] YMC reports there are no concerns using the product with confidence. Yamaha takes incidents of inappropriate handling very seriously and offers our deepest apologies to our customers, suppliers, business partners, and all other stakeholders for damaging their trust in Yamaha Motor Co., LTD.”)

Yamaha Motor Company maintained that they did not falsify or alter the data concerning the safety aspects of their motorcycles.

We posted a news item about obstructing the traffic offences being the most during Operasi Hormat Undang-undang (Ops HUU) which is currently running. So much so that a total of 15,075 summons related to the offence were issued in just seven days.

Accordingly, it is only appropriate that we look at the definition of the offence of “obstructing the traffic” more closely.

What does “obstructing the traffic” mean?

Obstructing the traffic refers to actions that interrupt, prevent, or restrict the smooth flow of traffic on the road.

What is classified as a traffic obstruction offence?

These offenses are governed by Malaysian traffic laws, such as the Road Transport Act 1987, and may result in legal action such as a summons, fine, or other disciplinary action against the responsible party. The purpose of this enforcement is to ensure the safety and smoothness of traffic for all road users.

This can include various types of errors such as:

  • Illegal parking: Parking a vehicle in a place that is not allowed or that obstructs traffic, such as at an intersection, in a pedestrian area, or in a no-parking zone.

  • Abandoning damaged vehicle/vehicle involved in an accident: Leaving a damaged vehicle or one involved in an accident in the middle of the road without taking steps to remove it or without giving adequate warning to other drivers.
  • Using the emergency lane: Using the emergency lane for purposes other than an actual emergency, such as cutting through heavy traffic.

  • Stopping in the yellow box: Entering and stopping in a yellow box when conditions do not allow a smooth passage is an offence.
  • Unlawful activities on the road: Carrying out activities such as selling goods, waiting for passengers, or any other activity that obstructs the flow of traffic in unauthorised areas.

  • Temporary construction or obstruction: Placing cones, barricades, or any temporary structure on the road without a permit that may impede or block traffic.
  • Unmanaged traffic congestion: Not taking appropriate action to manage traffic congestion during major events, accidents, or emergency situations.

 

Archive

Follow us on Facebook

Follow us on YouTube