Bikesrepublic

Latest News

While we revel at the current Ducati’s V4 lineup consisting of the Panigale V4, Streetfighter V4, Multistrada V4, and most recently the Diavel V4, Ducati had actually made a V4 engine even prior to producing their first V-Twin engine. Instead, perhaps ironically, it was the V-Twin that went on to bring the Ducati name to the masses, before they went back to the V4 to dominate the world’s racing circuits. The answer has to do with the machine the engine was fitted to: The Ducati Berliner 1260 Apollo which debuted in 1964.

How it began

Ducati’s United States distributor, the brothers Joe and Mike Berliner of Berliner Motor Corporation were convinced they could sell motorcycles to the American police departments. But they had to compete with Harley-Davidson who had a free run in that segment.

So, Joe Berliner approached Ducati in 1959 with a proposal to build that bike. Ducati was owned by the Italian government at the time and produced only the 20occ Elite. And, they were also in a bad state as with all other Italian motorcycle manufacturers who had to contend with the Fiat 500’s popularity.

However, official US police department specifications were increasingly standardised across the country, and naturally favoured their national product i.e. Harley. They required an engine capacity of at least 1200cc, a minimum 60-inch/1525mm wheelbase, and 5.00-inch x 16-inch tyres.

Mike Berliner shipped two Harley FL Duo Glides to Ducati for evaluation. After considering the design of the archaic 74 cubic inch (1212cc) Harley FL’s engine, Ducati’s chief Dr. Giuseppe Montano and chief engineer Dr. Fabio Taglioni agreed they could produce a more efficient and modern design. Taglioni eagerly accepted the commission as a technical challenge.

Unfortunately the bureaucrats in Rome showed much scepticism which resulted in dragged out negotiations until 1961 before Montana got the green light, and after Berliner promised to underwrite the project including development and production costs.

The name Apollo was chosen by the Berliner brothers in honour of the Apollo moon program which had just begun.

The engine and its performance

Taglioni was told to make the big bigger and faster and so, he designed a 1257cc, air-cooled, two-valved, 90° V4, with a 180 crankshaft. The bores and strokes were 84.5 mm and 56 mm, respectively, making it the most oversquare Ducati engine at the time. Valve actuation was handled by pushrods and rocker arms, rather than tower shafts and bevel gears. It made 100 hp at just 7,000 RPM.

Ducati gave it a 5-speed transmission to up the ante against their rivals who had 4-speed gearboxes. Taglioni even designed a provision to fit an automatic (CVT) in the future.

The engine was mounted in a heavy duty open cradle frame. There was a kick starter for the brave or with steel shins, but there was also an electric starter which looks similar to the Fiat TV1100’s. There was a massive 200w generator on the right side to cater for all the police electrical equipment. Ceriani developed the suspension, and front and rear single leading show drum brakes.

Weigh was finally tallied at 270 kg, dry. Although that is a lot even by today’s standards, it was actually lighter than the Harley’s 291 kg.

Ducati completed the bike’s styling with a peanut-style fuel tank, cowboy seat with a chrome cage grab rail, and forks and shocks that look similar to the FL’s.

Two fully working prototypes were built, one was painted gold for Berliner to demonstrate at shows, while another in black and silver. There were also two extra spare engines.

The test

So, off went Ducati’s test rider Franco Farne on the bike’s maiden test, only for him to return with the verdict: “It handles like a truck.” But the Ducati Berliner 1260 Apollo made up for it in straight-line performance, where it hit more than 200 km/h. It confirmed that it was most powerful the fastest European bike.

Unfortunately, that amazing performance was also its downfall, especially because it was fitted with those 16-inch automobile tyres. Another Ducati tester, and former GP mechanic Giancarlo Fuzzi‚ went out for a high speed test on the Milan-Bologna autostrada when the whitewall rear Pirelli ballooned, detached its tread, and came off the rim at around 160 km/h. Fuzzi called his survival “a miracle.”

The engine was subsequently detuned to 80 hp by lowering the compression ratio and fitting less aggressive cams, but it was still too much for any tyre at the time. Again it was detuned by lowering the compression even more to 65 hp and tyre wear became “acceptable.”

By comparison, the Moto Guzzi Grand Prix 500cc V8 had 20-inch wheels, but its 78 hp also shredded the bike’s tyres.

The end of the project

Berliner was of course happy with the performance and went ahead to print flyers to sell the bike. They planned to sell the detuned ‘normale‘ version to civilians as a touring model, while reserving the fully powered ‘Sport‘ version for law enforcement. In fact, 65 hp from the V4 was still more powerful than Harley’s 55 hp.

However, the detuned version had to contend with other European bikes such as BMW and British Twins.

Harley could also undercut the Apollo’s price of USD 1,500 by saying that they offer something close to that performance and a much cheaper price.

Then the Italian government decided that the limited market did not justify the tooling costs of production, and withdrew project funding. This was a severe blow to Berliner’s business plans.

What it could have been

The Ducati Berliner 1260 Apollo could have been the very first ‘superbike’ had tyre technology been up to the task; that and if it had used 18-inch tyres instead. Instead, the Honda CB750 appeared in 1969 to claim the honour. Even then, it had only 68 hp and a top speed of 201 km/h. Heck, even the “groundbreaking” Kawasaki Z1’s 903cc inline-four in 1972 produced only 81 hp and a top speed of 209 km/h.

Years later, Honda and Suzuki would copy the V4’s design for them to dominate GP racing.

It was indeed as missed opportunity.

However, the V4 engine’s design led Taglioni to design the engine that would bring about Ducati’s dominance in the superbike racing: The 90º V-Twin. But it could be seen that the 1257cc V4 had a place in his heart, which one of the spare engines sat in his office until his retirement in 1984.

Today, the black and silver prototype is owned by Hiroaki Iwashita, and resides in his museum at Yufuin on the island of Kyushu, Japan.

The fate of the gold coloured prototype is unkown.

Norton Motorcycles began in 1898 and has gone through a tumultuous history of innovations, racing and sales successes, decline, takeovers, and revivals.

There were three episodes of revival, first under an North American investment company, followed by Stuart Garner, and finally presently by India-based TVS Motor Company in 2020.

TVS Motor has great plans for the legendary brand and is looking forward to expanding it globally.

Begin Press Release

Norton Motorcycles, part of the TVS Motor Company, announced its investment and growth plans to put the company in the ideal place for international expansion. At the Goodwood Festival of Speed, members of Norton’s senior leadership team – Sudarshan Venu, Dr Robert Hentschel and Richard Arnold – shared the vision of the brand and discussed how Norton is now perfectly placed to expand globally.

Sudarshan Venu, Managing Director, TVS Motor Company, said: “Our vision, commitment and investment into the Norton brand is entering an exciting phase. We look forward to sharing that with motorcyclists across the world.

Sudarshan Venu

With TVS Motor’s backing and global capabilities, Norton is being reinvigorated as a global
brand, led by a strong and dynamic team.

TVS Motor has committed £200 million across the life of the investment in new product development, facilities, research and development and world class quality engineering. The new Norton motorcycles will follow the company’s philosophy of ‘Design, Dynamism, and Detail’. Exciting product launches are being planned starting next year, with six new models planned over the next three years. As part of this, Norton is preparing for international expansion with an initial focus on the USA, Germany, France, Italy and India.

Appointments include Richard Arnold, Norton Executive Director, former CEO of Manchester United Football Club and Dr. Robert Hentschel, Executive Director & CEO, of Norton Motorcycles. Bringing together the right people has put Norton in the best position to capitalise on its growth.

As a result of TVS’s investment and support, Norton’s revitalised research and development has been channelled into its product pipeline through its state-of-the-art facility in Solihull, UK. Testament to this is the One of One V4SV, inspired by Steve Hislop’s ‘White Charger’ that sped up the Goodwood Hillclimb every day of the festival.

Dr. Robert Hentschel, Executive Director & CEO, said: “The investment in research and development and leadership has us positioned to take six exciting products to countries across the world, with world class quality and scale, spelling another epoch of success in the Norton story. Our focus on design, drivability and details will maximise the exciting opportunity for Norton as well as for those new customers that choose one of our motorcycles.

Dr. Robert Hentschel

This year also marks the completion of Norton Motorcycles honouring Norton Motorcycles UK Ltd (NMUL) customers. After investing £2.3 million into the development, manufacturing and re-engineering of the Commando and V4 platforms, the fulfilment and delivery of orders for customers of the previous company signifies the closing of a significant chapter in which Norton can fully focus on the company’s future.

Richard Arnold, Executive Director, said: “Norton’s heritage is vast, and plays a key part in our development as a global brand. It’s important for us to prioritise our customers, both in the present and the future. Not only with new bikes but also with every touch point of the Norton experience. The products currently in testing and development are incredibly exciting. Bikers around the world will love to ride them and love to own them, I am looking forward to expanding their availability to local dealers in new territories and connecting with bikers to share the Norton journey.

Richard Arnold
End Press Release

So, let us look forward to Norton reentering Malaysia’s market, shall we?

Will we may see the end of the Ducati V-Twin superbike, with the announcement of the Ducati Panigale V2 Superquardro Final Edition? The factory will still utilise the 90° V-Twin engine in other models, of course, but it will be a sad day to see the absence of a two-cylinder Ducati superbike in the lineup, for it was the V-Twin (Ducati calls it the ‘L’-Twin) that cemented Ducati’s name in the halls of excellence.

So maybe it is a good time to retrace the evolution of the Ducati V-Twin superbike. (This article only covers Ducati’s sportbikes with the Panigale V2 Superquardro Final Edition as the main picture.)

When did the Ducati V-Twin begin?

As with almost all manufacturers, Ducati had started with building single-cylinder engines. The first one was in fact a 48cc unit made by SIATA which Ducati installed in the bicycle in 1950.

Ducati actually built their first V4 engined motorcycle called the Berliner 1260 Apollo in 1964. It was a beast that almost no one could ride and no rear tyre could withstand the engine’s torque and power. Well, why not: The 1257cc air-cooled 90° V-Four engine produced 100 hp at just 7,000 RPM. By comparison, the Harley V-Twin of the era did only 55 hp. (We shall write a story about this intriguing bike soon!)

One day, 20th March 1970, Dr. Fabio Taglioni began sketching on a 90° V-Twin engine. It was from here that an entire slew of models came about both in racing and its adoption to street models, including 500cc racebikes and 750cc road bikes. The Ducati 750 Imola Desmo went on to win the Imola race in 1972.

The camshafts were driven off a tower shaft and bevel gear system up to this point. Taglioni introduced the Pantah 500SL with belt-driven cams in 1980. This belt-driven system continued until the Superquardro V-Twin came to light on the Panigale 1199.

Two became four

Dr. Taglioni had experimented with the four-valved head but seemed to have made no headway. Instead, it was his understudy, Massimo Bordi who successfully designed and pushed it through.

The four-valve 90° V-Twin engine, now known as the Desmoquattro, began in the prototype 748IE Bol d’Or racer in 1986, before being adopted in the Ducati 851 in 1987. At the same time, it was also Ducati’s first liquid-cooled engine. Raymond Roche took the 851 to the first World Superbike crown for Ducati in 1990 hence starting Ducati’s domination in the championship.

The 851 became the 888, then came the iconic 916 that in turn became the 955 (ultra limited SP version only), and finally the 996.

Subcategories of the Desmoquattro

Testastretta

In 2001, Ducati brought out the 996R homologation model. It was essentially used the 998cc engine  which featured the new Testastretta head or “narrow head.” The new Testastretta had the included valve angle reduced from 40 degrees to 25 degrees. As such, the bore could be made bigger to increase the rev limit, hence producing more top end power.

The 999, designed by Pierre Terblanche was a wholly redesigned bike, followed in 2003. However, the design was way too far of its time and was severely panned, despite the 999 being better in almost every department.

Testastretta Evoluzione

The 999 was in turn succeeded by the 1098 in 2007. It was the most powerful V-Twin of the era and was well-received, what with a styling that “evolved” from the 916. The 1098 became the 1198 in 2009.

Superquadro

The 1098/1998 lineup was subsequently replaced by the 1199 Panigale in 2012 hence began the Superquardro engine. It was the most powerful V-Twin at the time, punching out 195 hp and 133 Nm.

There were several changes, most obvious was the deletion of the belt-driven cams for a hybrid gear/chain drive. Ducati made four displacements for this engine, ranging from 898cc to 1285cc.

The smaller V-Twin sportbikes

We need to mention the smaller capacity Ducati sportbikes as they led to the Ducati Panigale V2 Superquardro Final Edition. Amidst the 916 was the smaller 748 which Ducati raced in the SuperSport categories vs. 600cc inline-four superbikes. The 748’s engine was of course, a 90° Desmo V-Twin with four-valves per cylinder, but displaced 748cc. So, to complete the timeline, the 748cc engine started getting bigger becoming the 749, 848, 899, and finally the present 955 with the Superquardro engine. The 955cc Panigale was rebranded as the Panigale V2 following the debut of the Panigale V4 in 2018.

 

On-off, on-off. Even probably causing the Indian GP to be moved to an entirely different date. That is the saga with the proposed Kazakhstan MotoGP 2024. It has now been completely cancelled and will be replaced by a second outing at Misano.

Kazakhstan had been slated for 2023 but the Sokol International Circuit was deemed not ready. That pushed the round to this year. Unfortunately, an unprecedented flood hit the Central Asian region in May which forced the round slated to begin from 16 June to be cancelled indefinitely.

Then the Indian GP’s organisers threw another curve ball which put it on hold, too. Consequently, Dorna decided to replace the Indian GP scheduled to begin from 2oth September with the Kazakhstan GP. The Indian GP, on the other hand, was moved to March next year.

But that is not the end, as MotoGP issued a statement saying that the Kazakhstan round has been cancelled altogether owing to logistical issues that “have rendered the event impossible to run” after the flooding.

“The FIM, IRTA and Dorna Sports announce the cancellation of the Grand Prix of Kazakhstan,” the statement reads. “Operational and logistical issues arising from the earlier flooding across the region have rendered the event impossible to hold in 2024.

“Misano World Circuit Marco Simoncelli will instead host the Emilia-Romagna Grand Prix from the 20th to the 22nd of September.

“MotoGP is excited to stage a second event at the iconic Adriatic venue, giving the passionate Italian fanbase a further opportunity to see the world’s most exciting sport in action.”

The revision creates an awkward situation as the World Superbike Championship will also run during the same weekend, albeit on another Italian track, the Cremona Circuit. The first Misano MotoGP round will be held from 6-8 September. So, Italy sees 3 rounds of motorcycle racing in two weeks.

Boon Siew Honda Sdn. Bhd. has announced two new colour options for the 2024 Honda ADV160, namely Gray and White.

It will be available at all Honda Impian X and authorised Honda dealers nationwide from 18th July 2024. Recommended selling price is from RM 13,249 (not on the road). The popular lightweight adventure motorcycle

The mechanical aspects of the popular lightweight adventure scooter remains unchanged, featuring a 157cc, single-cylinder, 4-valve engine with eSP+ technology, that delivers 11.8 kW (15.8 hp) at 8,500 RPM and 14.7 Nm of torque at 6,500 RPM.

The engine’s performance is complimented by the Honda Honda Selectable Torque Control (HSTC) system that optimises engine torque delivery according to tyre traction, while an advanced Idling Stop System (ISS) enhances the engine’s fuel efficiency.

Rider comfort still consists of a low seat height of 780mm, besides a two-step adjustable windscreen. ABS is standard for the front brake only, despite the rear disc brake system.

Other features include the Honda Smart Key system, a 5V 2.1A USB charger, and 30 litres of underseat storage space.

Honda claims the 2024 Honda ADV160’s wet weight with a full tank of fuel at 133kg.

Buyers are entitled to a 20,000km or two year warranty, whichever comes first.

Please visit https://boonsiewhonda.com.my or visit the nearest Honda Impian X dealer for more details, or call the toll-free number 1-800-88-3993.

2024 Honda ADV160 Photo Gallery

We have been teased, we have read leaked spec sheets and even seen blurred out images, but it has all come to an end now as Royal Enfield has officially unveiled its second roadster model – the Guerilla 450.

Said to be the road going variant of the successful Himalayan 450, the Guerilla is at home in the mountains as it is on the streets of a densely populated urban city. Hence why the chosen launch location, the vibrant and historic city of Barcelona is such an apt location.

The Guerilla was developed in and around Barcelona, and though we have only been fed some information about the bike in the past few months, Royal Enfield has been quietly working on the bike since 2019. That is a long time in the making, but as they say, good things come to those who wait and after having ridden it, we can say that it is indeed a very good thing.

But we can’t tell you much about how it feels like because of an on-going embargo that does not allow reviews to be published until the 27th of July. That is because the test ride event in Barcelona is still on-going and there still are many journalists who are yet to ride the bike. So to level the playing field, Royal Enfield put out an embargo, and we respect that.

What we can tell you though are the specifications and we can also show you what the bike looks like, in detail this time with no blurred out parts.

The Guerilla 450 shares a lot of its underpinnings with its sibling, the Himalayan, so we are warning you right now that there will be a lot of Himalayan references coming up. Bear with us.

The design though is the biggest (and most obvious) difference. But there are elements of the Hunter 350, which is not all that surprising since the two are essentially Roadsters.

Starting with the tyres, the Guerilla runs on the same Ceat Gripp XL Rad tyres that we first saw on the, you guessed it, Himalayan. The tyres were built specifically for the adventure bike but Royal Enfield says the hard compound tyres have been repurposed for the Guerilla.

The tyres wrap a set of 17-inch wheels front and back while braking power is managed by a 310mm disc up front that is gripped by a dual-piston ByBre caliper. The rear is kept in check by a 270mm single-piston caliper. Both are further backed up by a dual-channel ABS system.

Suspension consists of a 43mm telescopic fork up front with 140mm of travel while a monoshock with 150mm of travel manages the rear. The latter is adjustable for pre-load.

The forks have a rake angle of 21.8 degrees which is 4 degrees less than the Himalayans while the trail measures in at 91mm, a full 27mm shorter than the Himalayan.

This results in the bike have a 70mm shorter wheelbase at 1440mm and overall length of 2090mm, which is shorter by 155mm than its bigger brother.

On the topic of dimensions, the Guerilla is ideal for those who are challenged in the height department. It has an overall height of 1125mm (down by 191mm from the big H) while the seat is just 780mm off the ground. There is an high seat option that sits 800mm off the ground as well as a low seat option that sits 760mm. This makes the Geurilla well suited for all builds.

In terms of weight, the Guerilla weighs just 185kg (kerb with 90% fuel and lubricants) and that makes it 11kg lighter than the Himalayan.

As for tech, the Guerilla has the same circular LED headlight as the Himalayan and the rear too has LED turn signals which also double up as the brake lights.

The colourised four-inch instrument panel is also the same as the Himalayan and offers smart phone connectivity through a dedicated Royal Enfield application. When it comes to navigation, rather than reinventing the wheel, Royal Enfield simply integrated Google Maps into the app and thus gives you turn-by-turn navigation on the meter panel itself. The display is truly extraordinary.

Now to the juicy bits.

Besides the obvious sharing of components, the biggest bit is the engine itself. The 452cc engine is almost unchanged from the one in the Himalayan and makes 40PS and 40Nm of torque.

What has changed though is its state of tune, with Royal Enfield saying that the Guerilla boasts best in class mid-range torque.

The six-speed transmission too is 90% identical with only the final drive being slightly taller. There is also the assist and slipper clutch that makes the lever feel ultra-light, which comes in handy in traffic.

The engine is mounted onto the same steel tubular frame as the Himalayan though it has been slightly modified while the sub-frame is all-new.

Royal Enfield says that the overall mass of the bike has been placed lower and towards the front of the bike to give it a more nimble feel in and out of corners.

The 11-litre fuel tank on the other hand is all new and made of metal, and the official fuel consumption figure is rated at 29.5km per litre which provides a theoretical range of a little over 300km.

There are a host of different colour ways and a bunch of official Royal Enfield accessories to match the character of the bike.

In terms of pricing, Malaysians will have to wait till the bike is officially launched for that but expect a sub-RM40k price tag.

As for the rest of the world, the prices are below:

Here’s a full gallery of over 160 photos of close-ups and action shots:

Archive

Follow us on Facebook

Follow us on YouTube