Bikesrepublic

kawasaki

  • The four Japanese motorcycle manufacturers namely Honda, Kawasaki, Suzuki, Yamaha will work together to develop motorcycle batteries.

  • They should be working on battery swapping technology to overcome long charging times.

  • Yamaha is already working with Gogoro in Taiwan for battery swapping.

The four Japanese motorcycle manufacturers namely Honda, Kawasaki, Suzuki, Yamaha will work together to develop motorcycle batteries.

The joint effort is to combat the bane of current electric motorcycles: Charging times. Make that long charging times. As such, they should be coming up with a solution to swap low-power or depleted batteries with fully charged ones.

Their solution should be similar to Gogoro’s, which is currently in operation in Taiwan. Electric bike riders visit a charging station, pull out the depleted battery in their motorcycles, insert it into the charging station and swap it for a fully-charged one.

Yamaha is already working with Gogoro on this solution in the island state.

Gogoro first entered the Taiwanese market in 2015. Since then, 750 GoStations have been installed, catering to some 17 million battery swaps. The company is targeting 3,000 stations, ultimately.

Honda and Yamaha are the strongest players in the electric motorcycle sector among the four manufacturers. But with the dateline for electric vehicles looming on the horizon, Kawasaki and Suzuki need to hustle in producing their own electric bikes. Most European countries will revert to new electric vehicles only in a decade or so, while phasing out fossil fuel vehicles.

Malaysia, without a doubt is still lagging far behind. Currently, only luxury cars are hybrid or electric. Consequently, the infrastructure is built by these manufacturers to cater for their own cars.

Motorcycle charging or battery swapping stations? Forget about it. The Malaysian government ought to step this up quickly.

  • The recall for the 2019 Kawasaki Z900 line-up for a potential ABS issue applies to the US only.

  • There is no notice issued for Malaysian owners yet.

  • The issue arose after improper machining of the ABS pump.

The factory recall for the 2019 Kawasaki Z900 line-up over potential ABS issues is for the American market, only.

BikesRepublic.com has sought the confirmation from Kawasaki Motors (Malaysia) Sdn. Bhd. (KMMSB) over the matter. According to KMMSB, Kawasaki Heavy Industries have not issued a notice on the recall in Malaysia.

The current notice is issued by Kawasaki together with the American National Highway Transport Safety Administration (NHTSA). Therefore, it applies to Z900 line-up owners in the United States, at the moment.

The recall was made after the discovery of improperly machined ABS pump. The machining process has the potential of leaving aluminium debris inside. If this happens, the ABS pump could malfunction and cause the wheel or wheels to lock up.

Kawasaki USA confirmed that 497 units are involved in the recall and will notify the owners. If you are reading this from the United States, you may contact Kawasaki customer service line there 1-866-802-9381 (regarding recall number MC19-01). Please have your VIN ready. You may get in touch with the NHTSA at 1-888-327-4236 and quote campaign number 19V083000.

  • Kawasaki GTROC (GTR Owner Club) celebrates their 6th gathering today.

  • The ride started from Kawasaki Motors (Malaysia) Sdn. Bhd.’s HQ in Glenmarie, Shah Alam.

  • They will ride to Melaka to meet another GTR group to bring the total to 300 motorcycles.

Kawasaki 1400GTR onwers of from the GTR Onwer Club (GTROC) begun their 6thgathering today in the historic city of Melaka.

Some 50 owners of the high-powered sport-tourer congregated at Kawasaki Motors (Malaysia) Sdn. Bhd.’s (KMMSB) compound for the flag off. From there, they rode to Ayer Keroh, Melaka to meet up with another group of 1400GTR owners, bring the total to almost 300 motorcycles.

The group will visit an orphanage and a religious school for charity work, as part of the ride’s itinerary.

The Assistant General Manager of KMMSB, En. Awaluddin Bin Md. Lip, and Assistant Manager for Marketing of KMMSB, En. Ahmad Radzi Abdul Rahman (better known as Che Mad) welcomed the group. They added that KMMSB felt honoured to support the group and their activities, besides looking forward to more co-operations in the future.

President of GTROC, Dato’ Shaid Tasiran thanked KMMSB for their support. He then laid down the rules for the convoy, including the etiquettes such as following the marshals’ signals, no wild riding, etc., besides their itinerary and routes.

The Royal Malaysian Traffic Police will escort the group once they reached Melaka.

The ride was flagged off by En. Awaluddin Bin Md. Lip.

PICTURE GALLERY

  • Kawasaki Motors Malaysia (KMSB) organised their annual Kawasaki Road Safety Campaign.

  • Held at the Sungai Besi toll plaza, the campaign entered its fourth year focused on improving overall road safety for bikers.

  • Complimentary 16-point bike checks were conducted for all bikes of different brands and models.

In conjunction with the upcoming Chinese New Year 2019 celebrations, Kawasaki Motors Malaysia (KMSB) organised their annual Kawasaki Road Safety Campaign 2019 or “Kempen Keselamatan Jalan Raya Kawasaki 2019”. Held at the Sungai Besi toll plaza (Southbound), the campaign entered its fourth year which was jointly-organised with the Malaysia Motorcycle and Scooter Dealers Association (MMSDA) to promote riding safety. (more…)

  • Kawasaki Motors Malaysia Sdn Bhd (KMSB) has officially launched the 2019 Kawasaki Ninja ZX-10RR and the Ninja ZX-6R.

  • The launch was held at KLIMS 2018 together with the introduction of the Kawasaki Genuine Oil.

  • Both the new ZX-10RR and ZX-6R are priced at RM159,900 and RM79,900 respectively.

The good folks from Kawasaki Motors (Malaysia) Sdn Bhd (KMSB) have successfully conducted one hell of a show-stopper earlier today with the launch of the all-new 2019 Kawasaki Ninja ZX-10RR and Kawasaki Ninja ZX-6R in conjunction with the Kuala Lumpur International Motor Show 2018 (KLIMS). (more…)

  • The 2019 Kawasaki Ninja ZX-6R has been unveiled.

  • It features a new look with revised components.

  • The engine is still the 636cc unit but tuned for Euro4.

The new 2019 Kawasaki Ninja ZX-6R has been launched at the AIMExpo in Las Vegas after rumours had been circulating for a couple of years.

The new model features a changed styling to look sharper and aggressive (in Kawasaki’s words), besides new additions to its spec sheet such as LED lighting and more.

The highlights are:

  • Kawasaki Quick Shifter (KQS) as standard although only for upshifts.
  • New styling with twin LED headlights and taillight.
  • “High-grade” instrumentation although the design is similar to all new Kawasaki motorcycles, including the Versys-X.
  • Euro4 emissions-compliant engine tuning.
  • Optimized gear ratios to improve low-end power.
Engine

The 2019 Kawasaki Ninja ZX-6R’s engine still looks the same: 636cc, liquid-cooled, DOHC, inline-Four. However, it is now tuned to comply with Euro4 emissions standards “without compromising the engine’s performance.” No power and torque numbers were released, though.

The fuel injectors have been revised for low to midrange performance. The number one and four intake funnels are shorter while two and three are longer.

Piston skirts are molybdenum-coated to reduce friction. There are connecting passages between cylinders to reduce pumping losses.

Lastly, spent gasses exit through a redesigned exhaust system, which is again tuned for low and mid-range torque.

Transmission

Features a cassette-style gearbox for easy gearing changes. The KQS is standard although available for upshifts only.

Assist and Slipper Clutch

The assist function compresses the clutch plates together on acceleration, producing a lighter pull at the lever. The slipper function reduces back-torque and prevents rear wheel hop during deceleration.

Chassis

The 2019 Kawasaki Ninja ZX-6R uses a pressed-aluminium perimeter frame. The manufacturer claims that it is narrow and compact.

The bike will now utilize the Showa SFF-BP (Separate Function Forks – Big Piston) forks that combine the features of the SFF and BPF forks.

The Showa rear shock is fully adjustable.

Traction Control and Power Modes

KTRC traction control has 2 modes, ABS is standard and the power modes are “FULL” or “LOW”.

  • The 2018 Kawasaki Ninja 250 is all-new.

  • The new engine produces 38.2 bhp –  the most powerful 250cc, four-stroke roadgoing engine.

  • It is priced from RM 23,071 (basic selling price).

Testing the 2018 Kawasaki Ninja 250 kinda reminds me of having my favourite tomyam.

However, the first I’d do when it’s served is to locate and remove the cili padi (called “bird eye chili” in English, but that doesn’t sound good as a title, does it?). Then again, I’d sometimes miss a little flake and chewed it. Oh, the horrors! How could something so little cause so much “excitement”?

Kawasaki Motors Malaysia Sdn. Bhd. (KMMSB) launched the 2018 Ninja 250 at the Art of Speed 2018 in July and it’s since garnered lots of excitement.

2018 Kawasaki Ninja 250 official launched at AOS 2018 – RM23,000

Being used to bigger bikes, my initial inclination was, “Beautiful bike, but how fast can it go?” Okay, let’s come back to this later.

I’ve always referred to the 250cc segment as the “Game of Thrones” category. Being the most affordable higher capacity motorcycles after sub-200cc bikes, manufacturers fight tooth and nail for a piece of the pie. Yes, Kawasaki wants to dominate this sector, hence the 2018 Ninja 250 is new from the ground up.

First, the design. Kawasaki are styling their bikes to reflect a family identity. As such, one could very well mistake the new bike for the ZX-6R or even ZX-10R at first glance.

There are plenty of sharp angles at the front alone, especially on the “chin spoiler” below the headlamps alluding to more downforce at high speeds. The fairing flares outwards by the time it reaches the knee cutouts, making the bike look like a bigger capacity model.

 

The 249cc, liquid-cooled, DOHC, eight-valve, parallel-Twin is all new and has been tuned to produce 38.2 bhp at 12,500 RPM and 23.5 Nm of torque at 10,000 RPM. It’s apparent that the engine is a screamer. The assist-and-slip clutch is retained.

Other changes include:

  • Reworked radiator fan shroud which directs hot air away from the rider.
  • Improved ergonomics.
  • Single 310 mm floating disc clamped by a 2-piston caliper.
  • 41 mm telescopic forks.
  • 14-litre fuel tank.
  • 164 kg wet weight.

The seating position was sporty beyond doubt. The clip-on handlebars may look tall but it feels much lower when you’re seated on the bike; due to the compact fuel tank which puts you right up front. Such arrangement is good for mass centralization. The clip-ons are also angled downwards for a more comfortable riding position at high speeds.

The new engine is much quieter when idling, too. Gone is the loud ticking from the valvetrain of its predecessor. Blipping the throttle sends the needle flying up the rev counter.

First gear in, added some throttle, clutch out and… CLACK! The engine cut out. Lucky for me no one was looking. You need to slip the clutch a little more to get going.

Acceleration was much, much smoother than I had anticipated. But the engine felt rather benign below 5000 RPM. More gas then. The rev counter’s needle swung up, up, up and the bike took off when it hit 8000 RPM. The exhaust note changed to a howl, accompanied by a guttural growl from the airbox underneath the tank.

Once, I let rip on the Ninja 250 to teach an MT-07 rider a lesson he won’t soon forget. Pinning the throttle, the “Little Red Chili” picked up speed surprisingly quickly for a 250, until we hit 179 km/h with 1000 RPM before the redline. Mr. MT never dared to re-approach.

I related the experience to fellow journalists and one guy who’s smaller and lighter than I am recounted that he hit 192 km/h!

That’s almost unheard of for a stock 250cc four-stroke road bike.

Of course, none of that speed would mean anything if the bike couldn’t handle.

Steering was close to being effortless and you could swing the bike from side to side even while accelerating at full throttle. Yet, it was uncannily steady like a long wheelbase big bike in a straight line.

The suspension’s well-tuned for the war on corners. Here’s a tip: To maximize the Ninja 250’s corner speed, brake early followed by early brake release.

The slipper clutch’s nicely tuned to provide a degree of engine braking but it still allows the bike to freewheel into corners. Yes, like a two-stroke. Fun!

Riding a lightweight bike such as the Ninja 250 in traffic is a breeze as the bike changes directions quickly. The brakes are pretty strong, too. Another thing which I appreciated was the lack of hot air from the engine cooking certain organs. I do want another child, you know.

So, back to “Beautiful bike, but how fast can it go?” You see, the 2018 Kawasaki Ninja 250 isn’t about just top speed. Instead, Kawasaki has done a great job in reinventing the sporting 250 by infusing awesome handling and speed seamlessly, and wrapped in a beautiful bodywork.

And yes, small things can cause great excitement, just like the “Little Red Chili” here.

2018 KAWASAKI NINJA 250

ENGINE
ENGINE TYPE 4-stroke, DOHC, 8-valve, liquid-cooled, parallel-Twin
DISPLACEMENT 249 cc
BORE x STROKE 62.0 mm x 41.2 mm
POWER 38.2 bhp (39 PS) @ 12,500 RPM
TORQUE 23.5 Nm @ 10,000 RPM
COMPRESSION RATIO 11.6:1
TRANSMISSION 6-speed
FUEL SYSTEM Electronic fuel injection with dual ø 32mm throttle bodies
CLUTCH Multiple-plate wet clutch, cable-operated
CHASSIS
FRAME High tensile steel trellis
FRONT SUSPENSION ø 41 mm telescopic forks
REAR SUSPENSION Bottom link Uni-Trak, gas-charged monoshock, adjustable spring preload
FRONT BRAKE 1 X Two-piston caliper, ø 310 mm disc
REAR BRAKE 1 X Single-piston caliper, ø 220 mm brake disc
TYRE FRONT; REAR 110/70-17; 140/70-17
STEERING HEAD ANGLE 24.3o
TRAIL N/A
WHEEL BASE 1,370 mm
SEAT HEIGHT 795 mm
FUEL TANK CAPACITY 14 litres
KERB WEIGHT 164 kg
  • Eight members of the Kawasaki Versys-X 250 Community (VEXCOM) have set on a journey towards Southern Thailand.

  • The road trip was organised to promote Kawasaki’s entry-level bike off-road capabilities.

  • The one-week trip is also hoped to create more interest in owning their very own machine and joining the VEXCOM family.

A total of eight brave and adventurous Kawasaki Versys-X 250 owners are currently on an epic journey towards Southern Thailand. Called the VEXCOM Road to Southern Thailand, the Versys-X Community (VEXCOM) members pushed off from the Kawasaki Motors Malaysia HQ last night located in Glenmarie, Shah Alam. (more…)

  • Kawasaki rider Jonathan Rea has dominated the 2018 Superbike World Championship season thus far.

  • He won his 8th consecutive race win in Magny-Cours, France.

  • The victory means he has sealed the season with five races to go.

Reigning Superbike World Championship (WorldSBK) champion, Johnathan Rea and Kawasaki Racing Team (KRT) have clinched their fourth straight championship title.

The 2018 championship was sealed at the Magny-Cours circuit in France this weekend when Rea won Race 1 (there are two races per round). It was Rea’s 8th consecutive and 13th total victory of the year.

Judging from the results, Rea and Kawasaki made the least mistakes for the rest to capitalize on. The Northern Irish rider finished only twice off the podium and retired once so far. Besides the 13 wins, he finished second on three occasions and once in third.

In terms of statistics, Rea had won 63% of the races and was on the podium for 86% after 23 races this season. He now has the chance of setting a new record for the most wins in a season.

Jonathan Rea wins #4 – Courtesy of WorldSBK

Rea is only the second racer to win four WSBK titles after Carl Fogarty, but he is the first to achieve the milestone back-to-back.

Pundits are quick to point out that Rea’s amazing achievement is due to other teams lacking full factory support and that his competitors’ bikes are pretty old to some extent. If this is true, we shall see how the new Ducati Panigale V4 does next year in the hands of Chaz Davies and Alvaro Bautista. Honda is also rumored to be coming up with a new V4-powered CBR1000RR.

In the meantime however, the man of the moment is Jonathan Rea, who is the current King of Superbikes. Long live the King!

  • Kawasaki Motors Malaysia (KMSB) has officially previewed the 2018 Kawasaki Z900RS Cafe here in Malaysia.

  • The preview was held at The Gasket Alley PJ in conjunction with the Distinguished Gentleman’s Ride Kuala Lumpur 2018.

  • KMSB has priced the 2018 Kawasaki Z900RS Cafe at RM72,372 (recommended sales price with 10% SST).

In conjunction with the Distinguished Gentleman’s Ride Kuala Lumpur 2018, Kawasaki Motors Malaysia (KMSB) took the opportunity to preview their latest upcoming machine to the modern classic crowd which is the 2018 Kawasaki Z900RS Cafe. The preview was held in at Tiga Supply Co. located at the heart of The Gasket Alley, Petaling Jaya. (more…)

  • Kawasaki found the Ninja H2 SX SE and Ninja H2 SX centrestands dropping on the ground.

  • As such they filed for a recall with the NHTSA in America.

  • Both bikes are not in Malaysia yet, but the issue should be resolved when they do make it over.

The Kawasaki Ninja H2 SX SE and Ninja H2 SX have not arrived at our shores yet but there is already a recall campaign for them starting in the United States.

Good news is, the problem should be rectified once the bikes reach Malaysia.

The recall was filed with the National Highway Traffic Safety Administration (NHTSA) in America.

The issue concerns the bikes’ centrestand (what we Malaysians call “full stand”) which may drop and hit the ground unexpectedly. The recall affects all 350 units of the Ninja H2 SX SE sold in the United States of America. The campaign also calls upon the Ninja H2 SX as centre stands were also fitted to them as an aftermarket option.

It was found that the centrestand pin may have been improperly welded, causing it to shift or fall off altogether as a result. In turn, it causes the spring holding the centrestand to detach, and the centrestand drops onto the ground, ultimately.

Great if you are one who are crazy enough to use the centrestand as a spark/fire starter, but no, it is dangerous!

The Kawasaki Ninja H2 SX and its higher-spec’d Ninja H2 SX SE are supercharged sport-tourers based on the manic Ninja H2 and Ninja H2R supercharged superbikes. The manufacturer claims 201 bho and over 137 Nm of torque. First unveiled at the 2017 EICMA show, the bikes started production this year.

Kawasaki Motors (Malaysia) Sdn. Bhd. has announced earlier that the models will make their way to Malaysia in the May/second quarter of the year, but the plan has since been delayed.

2018 Kawasaki Ninja H2 SX Malaysian debut in May – RM150,000?

  • Kawasaki Motors (Malaysia) has added another Kawasaki GT World Ninja Shop.

  • The new facility is operated by SC Premium Bikes Sdn. Bhd. located at Bandar Sunway.

  • The shop also includes a Kawasaki Exclusive Service Centre.

Fans, customers and owners of Kawasaki motorcycles now have a new home in Bandar Sunway, with the official opening of SC Premium Bikes Sdn. Bhd’s Kawasaki GT World Ninja Shop and Kawasaki Exclusive Service Centre (KESC).

As the Kawasaki GT World Ninja Shop is a flagship concept store, customers can expect a one-stop centre to view and purchase the latest Kawasaki motorcycles and buy the latest merchandize and riding gear.

Additionally, aftersales service is also fully supported in the Kawasaki Exclusive Service Centre. KESC provides the necessary expertise and tools to maintain and repair customers’ bikes, besides ensuring only genuine parts and accessories are used.

During the grand opening, Kawasaki Motors (Malaysia) Sdn. Bhd. (KMMSB) gave the assurance that they will continue to build a “ONE KAWASAKI” spirit among Kawasaki motorcycle owners, dealers and distributor, in line with the manufacturer’s “Let the good times roll” philosophy.

SC Premium Bikes Sdn. Bhd. is well-known among large-capacity motorcycle owners in the Klang Valley as a tuner. In fact, they were among the first motorcycle shops to provide electronic engine tuning in the country.

Finally, in the spirit of being “green,” the SC Premium facility employs green technology in its daily operations. It is the first Kawasaki GT World Ninja Shop which uses solar energy to power the electrical supply for the office equipment and lighting.

Please visit SC Premium Bikes Sdn. Bhd.’s and Kawasaki Motors (Malaysia) Sdn. Bhd.’s Facebook pages for more information.

PICTURE GALLERY

Archive

Follow us on Facebook

Follow us on YouTube