Desperate times call for desperate measures. This NSR150SP has been seen swimming inside the flood that happened recently in Bangkok. The rider has modified the exhaust pipe outlet to a level higher than the bike seat. The air inlet are also modified to be placed on the dashboard. This is to make sure both air flow from the carb to the exhaust not being filled with the flood.
You must see the video, after the jump (more…)
MM reader, All Blacks, has sent me a message about this Millyard Viper V10 superbike. This bike is an one-off motorcycle made by British engineers Allen Millyard. The engine is taken from Dodge Viper’s 8,000cc V10 which produces more than 500bhp. (more…)
At first, I only thought that by using big bore block to your bike it can only increase the amount of fuel and air that gets into the combustion chamber. Since more fuel and air get burned inside the combustion chamber this will give more power for every power stroke. I thought that is the only way the power is affected. (more…)
Czech superbike manufacturer has shown their bike, the FGR 2500 V6 which comes in 2,442cc 90-degree V6 configuration engine. The water-cooled engine produces 240hp (for comparison, 135LC is 12hp) and 200Nm of torque (135LC, 11Nm) which is enormous amount of power for this monstrous bike. The seat and fuel tank are made from carbon-fiber to reduce weight with 6 exhaust pipe on the rear end. The dry weight of this bike is 270kg supported with front and rear suspension from the ever popular Ohlins. Stopping power provided by Brembo.
It only takes 2.5sec for this bike to move from 0-100km/h and all the way to its top speed at 320km/h. Fuel consumption is at 6-8 liter per 100km (135LC, about 2.8 liter for 100km), which is not bad for this expensive machinery with big engine.
Full technical specs and more pictures after the jump (more…)
Honda Sport 150 might be featuring the beautiful Trellis frame on their next model. Honda Sport 150 are said to be the CBR150R or the CS1 with 150cc engine. Trellis frame are popular in many naked bike since it provides great chassis integrity with great looks too. It has been used in another Honda bikes such as the Honda VTR250. (more…)
Kawasaki Motors (Malaysia) Sdn Bhd has launched 3 new model of their bikes in Malaysia for 2012 lineup with prices starting at RM58,000 in 3 different categories. The first one is the Kawasaki W800 which is designed to have classic and traditional look taken for the cue of Kawasaki W1 which is a popular bike long time ago. Next one is the Kawasaki Versys 1000 which is the upgrade from Versys 650 with larger engine capacity. The last one is the Kawasaki Ninja ZZR1400 ABS which is a new model recently launched in US.
Kawasaki W800 is derived from the Kawasaki W1 which is being produced in 1966. At that time, it was the largest capacity bike from Japan and show the world that Kawasaki is in the big capacity bike arena. The design has not been changed much from the original model and this will make classic bike lover happy. (more…)
© Hak Cipta – BikesRepublic.com 2024. Trademark adalah hak milik pemilik sepenuhnya. Semua hak terpelihara.
